JC Whitlam Flow-Aide System Descaler Kit

Description

From Plumbing Deals' product listing.

```html JC Whitlam Flow-Aide System Descaler Kit for Tankless Water Heater Maintenance The JC Whitlam Flow-Aide System Descaler Kit is a complete tankless water heater descaling solution designed to remove scale, lime, rust, and mineral deposits from water-based equipment. This kit includes the pump, hoses, bucket, and Flow-Aide descaling solution needed to circulate cleaner through the system and help restore proper flow and heating efficiency. Flow-Aide System Descaler is a concentrated, biodegradable formula certified to NSF/ANSI 60 for use in potable water systems. It is designed to dissolve tough mineral buildup while remaining non-toxic, non-corrosive, non-flammable, and safe to handle when used as directed. Watch the Descaling Process See how the JC Whitlam Flow-Aide System Descaler Kit is used to flush and descale a tankless water heater. Complete Kit Includes 3.5-gallon bucket with tear-tab lid 725 GPH oil-free circulation pump with 15-foot power cord Two rubber hoses with male and female connections One quart of Flow-Aide descaling solution (FLOW32) Key Features Designed for tankless water heater descaling and maintenance Removes scale, lime, rust, and mineral deposits NSF/ANSI 60 certified for potable water system applications Non-toxic, biodegradable, non-corrosive, and non-flammable formula Helps restore water flow and heating efficiency Supports improved equipment performance and service life Compatible with systems using 3/4-inch hot and cold service connections Zero VOC formulation Recommended Applications The Flow-Aide System Descaler Kit can be used to clean and maintain many types of water-based equipment, including: Tankless water heaters Storage water heaters Heat exchangers Boilers Chillers Condensers Humidifiers Evaporators Ice machines Potable water lines Process water systems Why Descaling Matters Hard water deposits can restrict water flow, reduce heat transfer, increase energy usage, and shorten equipment life. Routine descaling helps maintain system efficiency and keeps equipment operating properly. Flow-Aide can dissolve approximately two pounds of calcium carbonate scale per gallon in concentrated form at 70°F, making it an effective alternative to vinegar-based flushing. Safe and Effective Formula Non-corrosive Non-hazardous Non-toxic Biodegradable Safe to handle when used as directed Suitable for potable water system cleaning applications Tankless Water Heater Descaling Procedure Disconnect power to the water heater. Close the hot and cold isolation valves and remove the service caps. Add approximately 1.25 gallons of water to the bucket. Pour one quart of Flow-Aide into the bucket. Connect the pump hose to the cold service valve. Connect the return hose from the hot service valve back into the bucket. Open both service valves and start the pump. Circulate the solution through the system for 30 to 45 minutes. Turn off and disconnect the pump. Dispose of the used solution according to local regulations. Flush the water heater with clean water for 3 to 5 minutes, or until the discharge runs clear. Reconnect the service caps and return the unit to operation. About J.C. Whitlam Since 1900, J.C. Whitlam Manufacturing has supplied professional-grade plumbing products and maintenance solutions. Known for innovation and reliability, Whitlam provides products that help contractors, maintenance teams, and facility managers keep plumbing and water heating systems operating efficiently. Resources Safety Data Sheet (SDS) Specification Sheet Product Features ```