Honeywell SV9641M4510 3/4" NPT Intermittent Hot Surface Pilot Ignition SmartValve

Description

From Plumbing Deals' product listing.

3/4" NPT x 3/4" NPT Intermittent Hot Surface Pilot Ignition SmartValve Control with standard opening and 3.5" wc pressure regulator setting Includes: (2) 3/4" x 1/2" reducer bushings and an LP conversion kit. Features These controls communicate directly with an electronic fan timer (ST9160 Electronic Fan Timer for single stage applications; ST9162 Electronic Fan Timer for two-stage applications) in typical forced warm air furnace applications. They also interface with the 208907 Terminal Board, providing compatibility with power stealing thermostats. Or, they directly interface with the appropriate power supplies and a system thermostat for additional appliance applications. When controlled directly by a thermostat, these controls do not provide a postpurge function, because power to the control is removed when the thermostat call for heat ends. The SV9541 and SV9641 Systems are suitable for a wide range of fan-assisted combustion gas-fired appliances including furnaces, rooftop furnaces, boilers, unit heaters, infrared heaters, water heaters and commercial cooking appliances. Specifications Flame Sense: Two Rod Type of Gas: Natural Ignition System Type: Intermittent Hot Surface Pilot Ignition Ignition Sequence: Intermittent Pilot Ignition Source: Pilot Ignition Trials To Lockout: Continuous retry PrePurge: 15 seconds Body Pattern: Straight-through Opening Characteristics (standard, step): Standard Opening Control Voltage (Thermostat or other call for heat): 24 Vac Ignition Trial Time (sec): 90 Sec Electrical Ratings: 24 Vac Frequency: 60 Hz Frequency: 50 Hz Flame Failure Response Time (sec): 1.6 sec @ 3 µA Ambient Temperature Range (F): -40 F to +175 F Ambient Temperature Range (C): -40 C to +79 C Dimensions (in.): 3.2 in. wide x 4.9 in. high x 4.1 in. long Dimensions (mm): 81 mm wide x 124 mm high x 104 mm long Pressure Regulator Setting (psi): 3.5 in. wc Pressure Regulator Setting (kPa): 0.87 kPa Pressure Ratings (psi): 1/2 psi Pressure Ratings (kPa): 3.5 kPa Inlet/Outlet Size (in.): 3/4 in. NPT x 3/4 in. NPT. Maximum Capacity (ft³/hr): 415 ft³/hr Maximum Capacity (m³/hr): 11.8 m³/hr Minimum Capacity (ft³/hr): 30 ft³/hr Minimum Capacity (m³/hr): 0.8 m³/hr Maximum Capacity at 1 in. P.D. (ft³/hr): 300 ft³/hr Maximum Capacity at 1 in. P.D. (m³/hr): 8.5 m³/hr Pressure Tapping: 1/8 in. - NPT Mounting: 0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically. Pilot Gas Outlet: Yes Tradeline Value: Super Tradeline