Honeywell SV9601M4571 Intermittent Hot Surface Pilot Ignition SmartValve Control

Description

From Plumbing Deals' product listing.

Includes: Two 3/4 in. x 1/2 in. reducer bushings and an LP conversion kit Product Overview:The SV9601 SmartValve System Controls combine gas flow control and electronic intermittent pilot sequencing functions into a single unit. This product family offers several different intermittent pilot sequences for a wide range of applications. This system is suitable for application in a wide range of gas-fired appliances including furnaces, rooftop furnaces, boilers, unit heaters, infrared heaters, space heaters, water heaters, decorative appliances, and commercial cooking units. The specific application of the SmartValve System is the responsibility of the appliance manufacturer. Product Specifications: Description: 3/4 in. NPT x 3/4 in. NPT Intermittent Hot Surface Pilot Ignition SmartValve Control with standard opening and 3.5 in. wc pressure regulator setting Flame Sense: Two Rod Type of Gas: Natural Ignition System Type: Intermittent Hot Surface Pilot Ignition Ignition Sequence: Intermittent Pilot Ignition Source: Pilot Ignition Trials To Lockout: continuous retry Body Pattern: Straight-through Opening Characteristics: Standard Opening Control Voltage (Thermostat or other call for heat): 24 Vac, 60 Hz. Ignition Trial Time (sec): 90 sec Electrical Ratings: 24 Vac Frequency: 60 Hz; 50 Hz Flame Failure Response Time (sec): 1.6 sec @ 3 µA Ambient Temperature Range (F): -40 F to +175 F Ambient Temperature Range (C): -40 C to +79 C Dimensions (in.): 3.2 in. wide x 4.9 in. high x 4.1 in.long Dimensions (mm): 81 mm wide x124 mm high x 104 mm long Pressure Regulator Setting (psi): 3.5 in. wc Pressure Regulator Setting (kPa): 0.87 kPa Pressure Ratings (psi): 1/2 psi Pressure Ratings (kPa): 3.5 kPa Inlet/Outlet Size (in.): 3/4 in. NPT x 3/4 in. NPT. Maximum Capacity (ft³/hr): 415 ft³/hr Maximum Capacity (m³/hr): 11.8 m³/hr Minimum Capacity (ft³/hr): 30 ft³/hr Minimum Capacity (m³/hr): 0.8 m³/hr Maximum Capacity at 1 in. P.D. (ft³/hr): 300 ft³/hr Maximum Capacity at 1 in. P.D. (m³/hr): 8.5 m³/hr Pressure Tapping: 1/8 in. - NPT Mounting: 0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically